Traffic Signs & Safety, Inc. manufactures a full line of ANSI Z535 and OSHA 1910.145 safety signs that are required to indicate and define specific hazards that, without identification, may lead to injury or death. We carry OSHA signs with the following headers: Danger, Caution, Safety First, Notice, Think, Be Careful, Radiation, Warning and many more. .
Choose from 152 OSHA specific messages that can be used with the above headers to indicate the appropriate hazard for your facility or job site. Custom messages can be added at no additional charge.
OSHA-3 Safety First signs are manufactured on Aluminum, rigid plastic or pressure sensitive vinyl. They are available with 152 standard OSHA codes. Custom messages can be added at no additional cost.
- Sign graphics are applied with translucent inks, vinyl, or translucent film
- Manufactured to last for years outdoors
- These signs will mount directly on a post, wall, or fence
- Sign will resist fading
**When purchasing an OSHA sign, please pick from the list below what message you would like on sign. Messages (under drop box for messages pick the number of the message you want on the sign, if a custom one is needed please specify during check out under special shipping instructions.**
Traffic Signs & Safety, Inc. can make any custom OSHA sign.
- Blank
- Custom message – specify during check out in special shipping instructions.
- 220 Volts keep away
- 440 Volts keep away
- Acetylene
- Acid
- Alcoholic Beverages and Drugs prohibited on this property
- All injuries No matter how slight must be reported to the supervisor
- Asbestos Authorized Personnel Only
- Asbestos Dust hazard respirators & protective clothing required
- Authorized Personnel Only
- Be alert, Don’t get hurt
- Be careful
- Blasting Area radio transmission prohibited
- Buried Cable
- Carelessness is dangerous
- Caustic
- Chemical Waste storage area
- Chlorine
- Close Clearance
- Closed Circuit TV Surveillance
- Compressed Air
- Contaminated Area
- Crane Overhead
- Cyanide
- Deposit Waste here
- Do Not block Door
- Do not drink this water
- Do not enter without wear safety glasses
- Do not operate within 10 ft. of power lines
- Do not operate without goggles
- Do not start engine
- Do not start this engine
- Do not walk under conveyor
- Do not watch the arc
- Don’t try to lift more than you are able to
- Do not watch Arc Welder at work the light might blind you
- Dust respirator must be worn on this job
- Ear protection required
- Ear protection required in this area
- Emergency exit
- Emergency shower eye bath
- Entrance
- Entrance for employees only
- Equipment starts automatically
- Ethyl Mercaptan flammable
- Everyone grinding required
- Eye protection required
- Eye protection in this area
- Eye wash fountain
- Fire regulations require this space to be clear at all times
- Flammable
- Flammable liquids
- Floor slippery when wet
- Gas
- Gasoline
- Hard hat area
- Hard hat & safety glasses must be worn in this area
- Hard hats required in this area
- Hazardous waste
- Help keep this plant safe & clean
- High noise level area wear your protector
- High pressure gasoline
- High voltage
- High voltage keep away
- High voltage keep out
- High voltage overhead
- Hydrogen No Smoking No open flames
- Infectious waste storage area
- Keep aisles clear
- Keep away
- Keep gate closed
- Keep hands clear of moving machinery
- Keep off
- Keep out
- Keep this passageway clear
- Keep this place clean and orderly
- Laser
- Low head room
- LP Gas No Smoking
- Medical waste
- Men working on line don’t throw switch
- Microwave oven in use
- No admittance without a permit
- No alcoholic beverages allowed
- No food or drink allowed
- No loafing or loitering in this office
- No smoking
- No smoking No open flames
- No smoking oxygen in use
- No smoking in this area
- No smoking matches or open flames
- No smoking under penalty of dismissal within 50 ft.
- No soliciting
- No trespassing on this property under penalty of law
- No trespassing
- No vehicles beyond this point
- Non potable water
- Not responsible for personal property in case of fire or theft
- Our aim no accidents
- Oxygen No smoking No open flames
- Place cigarettes, cigar butts & ashes in receptacles
- Please turn out lights
- Poison
- Poison gas
- Positively no admittance
- Posted no admittance
- Positively no smoking
- Posted no hunting fishing trespassing
- Propane
- Propane flammable
- Put things back in their proper places
- Radiation symbol only
- Radioactive materials
- Report all accidents
- Report all accident no matter how small to your supervisor
- Report all unsafe conditions to your supervisor
- Restricted area
- Restricted area no smoking anytime
- Restroom
- Rotating equipment
- Safety glasses safety shoes & hard hat required beyond this point
- Safety glasses required in this area
- Soliciting & posting of handbills prohibited
- Step down
- Step up
- Storage area flammable metrical
- Sulfuric acid
- The safe way is the best way
- The use of liquor on the premises will be an immediate dismissal
- There is no substitute for safety
- These doors must be kept closed
- This elevator is for freight only- Not for passengers
- This equipment starts & stops automatically
- This machine must not be operated without safety guard in position
- The machine starts automatically
- Unauthorized personnel keep out
- Underground cable
- Use hand rail
- Walk, don’t run
- Watch your step
- Wear gloves when handling acids or caustics
- Wear goggles when grinding
- Wear your goggles
- Wear your goggles while using this machine
- Wet floor
- Wet paint
- Wheels must be chocked before loading/unloading
Don't forget to order a post and hardware for easy installation.
If you don't see the OSHA safety signs you're looking for please use our Contact Form or call 401-396-9840 to speak to a sales representative.
.040 Aluminum
The many benefits of the .040 Aluminum sign include a standard baked on enamel finish from most suppliers, high gloss sheen, accepts high performance vinyl graphics and is relatively easy to machine and drill for custom shapes & looks. Aluminum signs in .040 thickness, comes in single sided and double sided sheets. It’s a flat, rigid metal substrate that is lightweight with a baked enamel finish made to withstand the elements for long-term outdoor and indoor use. Our custom aluminum signs are also available in many standard sizes, and colors. It can be easily bent and formed into many shapes, drilled, glued, and routed. Aluminum signs have longevity for exterior life.
Rigid Plastic
Our rigid vinyl plastic signs are the perfect combination of toughness, performance and versatility. Fabricated from naturally-occurring organic compounds. Rigid Plastic are excellent for interior or exterior applications as directional signage, architectural signage, real estate signage, trade-show signage and much more. Our rigid plastics can be cut on different sizes . They can also be single or double sided. They'll last years with proper care and storage. These signs are eco-friendly and can be recycled
Pressure Sensitive Vinyl (PSV)
Film designed for interior or exterior signage, decals, nameplates, die-cut letters and point-of-purchase displays. PSV is a bright white opaque vinyl, coated with an aggressive, high-performance, high-tack, permanent pressure-sensitive acrylic adhesive, and backed with a poly-coated, moisture-stable lay flat release liner backside printed. This film is designed to accept a variety of solvent-based inkjet and UV curable inks common to wide format digital printing systems. PSV liner offers excellent product lay flat in a variety of environmental conditions. Offering an excellent tear and abrasion-resistance, aggressive, high-performance, high-tack acrylic adhesive provides a permanent bond to a variety of surfaces; prevents edge lift from scrim vinyl and billboard surfaces with an excellent, moisture-stable lay flat release liner.