Each detour shall be adequately marked with standard temporary route signs and destination signs.
The Detour Arrow (M4-10) sign should normally be mounted just below the ROAD CLOSED (R11-2, R11-3a, or R11-4) sign. The Detour Arrow sign should include a horizontal arrow pointed to the right or left as required.
Detour signs M4-11, M4-12 and M4-13 have a green background with white copy.
BEGIN Auxiliary (Bicycle) signs are manufactured with .080 aluminum and are available with the following reflective sheeting options:
1. Engineering Grade reflective sheeting (EG)
2. High Intensity Prismatic reflective (HIP) - 10 year warranty
3. Diamond Grade reflective sheeting (DG) - 12 year warranty
- Sign graphics are applied with translucent inks, vinyl, or translucent film
- Weather-resistant traffic grade aluminum will not rust or crack
- Manufactured to last for years outdoors
- These signs will mount directly on a post, wall, or fence
- Sign will resist fading
- Pre-punched 3/8" mounting holes. (Top & Bottom)
** Any sign may be order with or without an arrow. Please indicate left arrow, right arrow or double arrow when ordering. If no arrow is specified, the message will be centered proportionally without an arrow. Please specified when adding to the cart.**
Don't forget to order a post and hardware for easy installation.
Traffic Signs & Safety, Inc. can make any custom sign. If you don't see what you are looking for please feel free to call our office at 401-396-9840 or use our Contact Form
Engineer Grade Sheeting:
Engineer Grade Reflective sheeting is a high quality, durable, enclosed lens retro reflective material. This reflective sheeting offers exceptional value for permanent traffic signage applications. Engineer Grade Reflective sheeting is the most economical reflective finish and is recommended for commercial and non-critical traffic signs. Engineer Grade Reflective Meets applicable requirements for Engineer Grade sheeting applications for Type I retro reflective sheeting as set forth in ASTM D 4956.
High Intensity Prismatic Sheeting: Best Value – Recommended
High intensity Prismatic sheeting is recommended where brighter daytime colors and slightly higher reflectivity levels are desired. Prismatic High Intensity sheeting is durable, highly reflective sheeting designed for traffic control and guide signs. Traffic Signs & Safety, Inc. recommends High Intensity Prismatic as the cost to upgrade over Engineer Grade Sheeting is minimal, it meets multiple specifications and has the lowest cost of ownership. Key benefits include vivid daytime colors, a scratch resistant finish and an improved optical package for increased night visibility. High Intensity Prismatic Sheeting comes with a 10 year warranty.
Diamond Grade Sheeting:
Diamond Grade sheeting offers excellent daytime color and the highest levels of reflectivity. It is our top of the line prismatic sheeting applicable for all high speed roadways and urban areas where higher or lower ambient light levels can make signs less visible. Diamond Grade sheeting is ideal for overhead guide signs and directional signs. Many state and local municipalities require Diamond Grade sheeting on Stop signs (R1-1), Do Not Enter signs (R5-1) and Yield signs (R2-1) Traffic signs manufactured with Diamond Grade sheeting provide early detection and an extended range of sign legibility. Meets specification ASTM D 4956-04, Type IX. Diamond Grade sheeting comes with a 12 year warranty.