24"x36" ADA Replaceable Cast In Place

SKU: 24"x36"ReplaceDomeADA
Call for Pricing

Cast In Place Replaceable Dome Detectable Warning Systems

Truncated dome detectable warning systems

  • For use in new curb ramps or new construction
  • Pressed into place in freshly poured concrete
  • Plastic sheeting protection covers entire surface of Cast-In-Place Tile
  • Standard sizes: 24" x 36", 24" x 48", 24" x 60", 36" x 48" and 36" x 60"

 

 INSTALLATION INSTRUCTIONS 

 

Cast in Place Replaceable Tactile, available in both Rectangular and Radius, is made of a colorfast and UV stable homogenous glass and carbon composite with fiberglass truncated domes for enhanced durability. The Cast in Place Replaceable Tactile is used for new curb ramps or new construction applications and is the only 100% replaceable Detectable Warning product on the market.



All of our truncated dome tactile surfaces are in full compliance with the American Disabilities Act Accessibility Guidelines (ADAAG), Public Right-of-Way (PROW) and California Title 24 Requirements. ADA Solutions Inc., products are approved for use by all major municipalities, DPW’s and state DOT's.

  1. DOME GEOMETRY In accordance with ADA Regulations for Detectable Warning on Curb Ramps: truncated domes with a diameter of nominal 0.9”, a height of nominal 0.2”, and an in-line spacing of 2.35” maximum.
  2. TWS UNIT DIMENSIONS TWS Units are available in 24”x36”, 24”x48”, 24”x60”, 36”x48”, and 36”x60” sizes. TWS Units may also be custom configured to accommodate specific project requirements. TWS Units measure 0.25” nominal thickness and features a 3/4” thick x 1” wide perimeter “flange” with air release vents.
  3. MATERIAL A homogenous glass and carbon reinforced composite which is colorfast and UV stable. Truncated domes are fiberglass reinforced for enhanced durability. The color of the TWS Unit is uniform throughout and does not rely on any type of paint coating to achieve color stability. Standard colors include: Federal Yellow, Brick Red, Clay Red, Safety Red, Gray, Black, and Blue.
  4. INSTALLATION TWS Units are to be used on new curb ramp locations. TWS Panels are equipped with ½’ x1 ½” heavy duty steel bolts (fasteners) protruding ½” from panel body. The bolts (fasteners) are secured into corrosion resident concrete inserts. This ensures that the bolts (fasteners) are securely embedded 2” into the concrete. Bolts (fasteners) are covered with a structural water tight cap. The TWS Unit is firmly pressed into place in the freshly poured concrete. The TWS Units may be replaced by removing the bolts and inserting a new interchangeable TWS Unit in the existing recess. The original inserts remain in place. The TWS Unit may be replaced in minutes.
  5. PHYSICAL CHARACTERISTICS: Compressive Strength 28,900 psi ASTM D 695 Flexural Strength 29,300 psi ASTM D 790 Water Absorption .07% ASTM D 570 Slip Resistance 1.18 Dry, 1.05 Wet ASTM C 1028 Flame Spread Index 20 ASTM E 84 Salt Spray No Change (200 hours) ASTM B 117 Chemical Stain Testing No Deterioration ASTM 1308 Abrasion Resistance 549 ASTM C 501 Accelerated Weathering Delta E?